Coconut Wastes Briquetting Machine

Coconut Wastes Briquetting Machine
Coconut Wastes Briquetting Machine
Price And Quantity
    Product Specifications
    • Briquetting machine
    • Produce white coal
    • 800-1000 Kg/hr
    • Cylinder
    • ap.8500 Kilograms (kg)
    • Other
    • Yes
    • Water Cooling System
    • 415 Watt (w)
    • DC Motor
    • 90mm
    • Red & blue
      Product Description
      Coconut Wastes Briquetting Machine

      This project is called  Biomass Briquetting Plant  and is a process of converting Agro waste and forestry waste into biomass briquettes/Bio coal. The biomass briquetting is the best renewable source of energy for healthy environment and economy. It  complete Eco-friendly green energy project.

      We all are well aware with the importance of energy and its sources. Energy is the key factor in the economic development of every country. The demand of energy is increasing day by day and the supplies of sources are limited. It is globally red alert for fossil fuel like petrol, kerosene, natural gas, LPG and lignite etc. this has made a huge gap between demand and supply of energy. Renewable energy is the ultimate solution, which can fill this gap. Most of advanced countries have adopted this concept and accepted this project and have retained their natural resources to get the solution of energy and fuels.

      Main concept of this project is to produce the material as a bio-coal, which is made from the wastages. We cannot destroy the wastages totally but we can use it with the help of briquetting plant and can produce the briquettes which ultimately generate energy. To provide the energy in low cost  is the main concept of the project.

      Almost any biomass can be briquetted. Briquetting plants set so far in India are using saw dust, bamboo dust, bagasse, cotton stalk, coffee husk, groundnut shell, mustard husk/stalk, pine needles, rice husk, sugar mill waste, jute waste, coir pith and other wastes & residues like castor shell,  tea waste, tree bark, wild grasses & shrubs i.e. any type of agriculture waste or forestry waste can be also briquetted individually or in combination without using any binder.

      • Raw material like saw dust is screened and stalk (Forest & Agro waste) are chopped by cutter chipper cum grinder (Single action) if the raw material size is bigger than 25mm.

      • For using material of two or more types, it should be mixed in suitable form.

      • If raw material has high moisture then it should be reduced by sun drying or using turbo dryer. Normally if the moisture level is higher than 15% there would be a requirement of dryer.

      • Raw material (of desired size) is transported by pneumatic system to holding bins fixed over briquetting press.

      • By screw conveyor, material moves from bin to the press.

      • Material is compressed by ram through taper bored die. By compression temperature is raised & lignin come to the surface and binds the material by its natural binder.

      • Briquettes are formed in shape of log and it is automatically pushed through cooling line to the storage point.

      BIOMASS MATERIALS CHARACTERISTICS WITH CALARIC VALUE

      Biomass materials and biomass based industry residues are very important renewable energy sources. The importance of these materials as alternate fuels has been well recognized for use in power generation. While the characteristics of biomass vary from different geographical regions, the values for typical biomass materials are indicated for general guidance.

      biomass Ash Content% Calorific Value Kcal/Kg.
      Sugarcane Bagasse 1.8 4380 K.
      Castor Seed Shell 8 3862 K.
      Castor Stick 5.4 4300 K.
      Coconut Wastes 6.31 3720 K.
      Coffee Husk 5.3 4045 K.
      Coir Pith 9.1 4146 K.
      Corn Cobs 0.2 4100 K.
      Corn Dental Stick 3 4050 K.
      Cotton Stalk & Shell 3 4252 K.
      Groundnut Shell 3.8 4524 K.
      Lemon Grass 5.8 4030 K.
      Mulberry Stick 2.49 4380 K.
      Rice husk 17.65 3950 K.
      Saw Dust 1.2 4400 K.
      Sugar Cane Leaves 5 3996 K.
      Sun Flower Stalk 4.3 4300 K.
      Sweet Sorghum Stalk 7.4 4100 K.
      Gum Arabic tree [Wood] 0.9 4707 K.
      Paddy Straw 15.5 3436 K.
      Mustard Shell 3.7 4300 K.
      Barks Wood 4.4 4270 K.
      Wheat Straw 8 4100 K.
      Soya Bean Husk 4.1 4170 K.
      Jute Waste 3 4428 K.
      Cashew Husk 20 4100 K
      Palm Husk 4.9 3900 K.
      Bamboo Dust 8 4160 K.
      Napier Grass 8.55 4051 K.
      Forestry Waste 7 3000 K.
      Mustard Stalk 3.4 4200 K.
      Wood Chips 1.2 4785 K.
      Rice Straw 21.2 3200 K.
      Tea Waste 3.8 4237 K.

      Note:
      Calorific value may vary due to different quality of raw material and mixer of Raw material.

      TECHNICAL SPECIFICATION OF BRIQUETTING MACHINE

      Features

      SUPER-65

      SUPREME70

      JUMBO9075

      Production Capacity

      600-750Kg/Hr.

      800-1000Kg/Hr.

      1200 1500Kg/hr. (Depends on the Raw

      Material).

      Finished product Size

      65 mm Diameter

      70 mm Diameter

      90 mm Diameter

      Briquette Length

      150 mm - 550 mm

      100 mm - 400 mm

      150 mm - 550 mm

      Finished Product Shape

      Cylindrical

      Cylindrical

      Cylindrical

      Raw Material form

      8mm -10mm

      10mm

      2025mm , If it is longer than 25mm, it

      Require s for cutting process.

      Process Cost/MT (Approx.)

      IRs.450/(Approx.)

      IRs.450/(Approx.)

      IRS. 525 (Approx.)

      Required power connection

      49 HP one machine

      59 HP one machine

      91 HP 67.85 KW 440 V

      Practical used Amp. Load

      40-50 Amp (Approx.)

      50 -60 Amp (Approx.)

      75 -85 Amp (Approx.)

      Power consumption

      25 - 30 Unit / Hrs.

      25 - 30 Unit / Hrs.

      35 - 40 Unit / Hrs.

      Trained & Skilled

      operator

      One / Shift

      One / Shift

      One / Shift

      Unskilled labor

      Six / Shift

      Six / Shift

      Four / Shift

      Manager Incharge

      One

      One

      One

      Total weight of complete plant

      4000 Kg. (Approx.)

      5800 Kg. (Approx.)

      8800 Kg. (Approx.)


      Trade Information
      • mundra - rajkot
      • Letter of Credit (L/C), Cheque, Cash in Advance (CID), Cash Advance (CA)
      • 45 Days
      • Africa, Middle East, Western Europe, Eastern Europe, South America, North America, Central America, Australia, Asia
      • All India
      • ISO-International Organisation for Standardization D&B-Dun & Bradstreet CE Marking Conformité Européene TUV SUD Patent Registered
        Contact Us

        Samrat Industrial Area No. 2, Opp. Kaneria Oil Industries, Gondal Road, Rajkot, Gujarat, 360004, India
        Phone :+918068091352